Straight-line dry drawing machines for high-carbon steel wire — typically nine drafts in one straight line — plus pulley, wet and inverted machines and the full auxiliary range for a turnkey plant.
We cover the full drawing process — drawing, annealing, stranding and take-up — engineered to work together.
Our core line — typically 9 drafts, inverter-controlled tension for stable, slip-free drawing of high-carbon steel wire.
Cost-effective dry drawing for medium wire with accumulated wire between blocks.
For fine and ultra-fine wire where coolant lubrication gives superior surface and tolerances.
Vertical configuration for stable, compact high-speed drawing of fine wire.
Pay-offs, take-ups, descalers and butt welders to complete the production line.
Continuous annealing and tinning units integrated with the drawing process.
Turnkey drawing + annealing + stranding + take-up lines planned for your product range.
Layout planning and installation guidance for a smooth commissioning.
Built for high-carbon and low-carbon steel wire. Drawing speed and motor power are set according to the strength of the drawn material and customer requirements.
| Model | LZ350 | LZ400 | LZ450 | LZ500 | LZ560 | LZ600 | LZ700 | LZ900 | LZ1200 |
|---|---|---|---|---|---|---|---|---|---|
| Drawing passes | 7–11 | 7–10 | 6–10 | 6–12 | 6–12 | 5–12 | 6–9 | 3–9 | 6–10 |
| Inlet tensile strength | <1250 MPa | <1250 MPa | <1250 MPa | <1150 MPa | <1150 MPa | <1150 MPa | <1150 MPa | <1150 MPa | <1150 MPa |
| Max. inlet size | 3.5 mm | 4.2 mm | 4.6 mm | 5.5 mm | 6.5 mm | 6.5 mm | 8.0 mm | 10 mm | 14 mm |
| Min. outlet size | 0.6 mm | 0.7 mm | 0.9 mm | 1.2 mm | 1.35 mm | 1.4 mm | 2.5 mm | 2.8 mm | 3.0 mm |
| Drawing speed | Determine the speed and motor power according to the strength of the drawn material and customer requirements | ||||||||
More answers on the general FAQ page →
Send your inlet/outlet sizes and target output — our engineers return a machine proposal and quote within 24 hours on working days.
